Shafts WRA (X90CrMoV18)
Shafts hardened and ground from X90CrMoV18
Hardened shafts made of X90CrMoV18 have a high hardness and are manufactured to a tolerance of h6. The hardening depth of the shafts depends on the shaft diameter and is approx. 5% of the diameter. The hardened shafts made of X90CrMoV18 are very suitable for sophisticated use in the area of linear guides, guide columns, straightening rollers and spars.
- Material: X90CrMoV18 (1.4112)
- Hardened: 54 HRC Rht approx. 5% of the diameter
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
- Material: X90CrMoV18 (1.4112)
- Hardened: 54 HRC Rht approx. 5% of the diameter
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
Serviceliste
-
TypeListenelement 1WRA04h6 WRA06h6 WRA08h6 WRA10h6 WRA12h6 WRA14h6 WRA16h6 WRA20h6 WRA25h6 WRA30h6 WRA40h6 WRA50h6 WRA60h6
-
Shaft diameterListenelement 24 h6 mm 6 h6 mm 8 h6 mm 10 h6 mm 12 h6 mm 14 h6 mm 16 h6 mm 20 h6 mm 25 h6 mm 30 h6 mm 40 h6 mm 50 h6 mm 60 h6 mm
-
Maximum wavelengthListenelement 32000 mm 2000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm
We cut and process the hardened and ground shafts made of X90CrMoV18 according to your wishes and drawings. The waves are hardened at the edge and soft in the center.
You can find the appropriate supports and shaft supports under linear ball bearings and accessories.
These products are used together with hardened shafts
