Shafts WRV (chrome plated)
Shafts WRV hardened, ground and chrome-plated made of Cf53
Hardened and chrome-plated WRV shafts made of Cf53 have a high level of hardness, are very rust-resistant and are manufactured to a tolerance of h6.The hardening depth of the shafts depends on the shaft diameter and is approx. 5% of the diameter. The hardened shafts made of X46Cr13 are very suitable for sophisticated use in the area of linear guides, guide columns, straightening rollers and spars.
- Material: CF53 (1.1213)
- Hardened: min. 59 HRC Rht approx. 5% of the diameter
- Thickness of the chrome layer approx. 10 µm
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
- Material: CF53 (1.1213)
- Hardened: min. 59 HRC Rht approx. 5% of the diameter
- Thickness of the chrome layer approx. 10 µm
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
-
TypeListenelement 1WRV06h6 WRV08h6 WRV10h6 WRV12h6 WRV14h6 WRV15h6 WRV16h6 WRV18h6 WRV20h6 WRV22h6 WRV24h6 WRV25h6 WRV28h6 WRV30h6 WRV32h6 WRV35h6 WRV40h6 WRV45h6 WRV50h6 WRV60h6 WRV70h6 WRV80h6
-
Shaft diameterListenelement 26 h6 mm 8 h6 mm 10 h6 mm 12 h6 mm 14 h6 mm 15 h6 mm 16 h6 mm 18 h6 mm 20 h6 mm 22 h6 mm 24 h6 mm 25 h6 mm 28 h6 mm 30 h6 mm 32 h6 mm 35 h6 mm 40 h6 mm 45 h6 mm 50 h6 mm 60 h6 mm 70 h6 mm 80 h6 mm
-
Maximum wavelengthListenelement 36000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm
We cut and process the hardened, ground and hard chrome-plated shafts according to your wishes and drawings. The waves are hardened at the edge and soft in the center.
You can find the appropriate supports and shaft supports under linear ball bearings and accessories.
