Waves W (Cf53)
Shafts hardened and ground from Cf53
Hardened shafts made of Cf53 have an inductively hardened surface and are manufactured to a tolerance of h6. The hardening depth of the shafts depends on the shaft diameter and is approx. 5% of the diameter. The hardened shafts made of CF53 are for high-end use in the areaLinear guides, guide columns, straightening rollersand spars are very suitable.- Material: CF53 (1.1213)
- Hardened: 59-65 HRC Rht approx. 5% of the diameter
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
- Material: CF53 (1.1213)
- Hardened: 59-65 HRC Rht approx. 5% of the diameter
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
Serviceliste
-
TypeListenelement 1W02h6 W03h6 W04h6 W05h6 W06h6 W08h6 W10h6 W12h6 W14h6 W16h6 W18h6 W20h6 W22h6 W24h6 W25h6 W30h6 W35h6 W40h6 W45h6 W50h6 W60h6 W70h6 W80h6 W90h6 W100h6 W120h6
-
Shaft diameterListenelement 22 h6 mm 3 h6 mm 4 h6 mm 5 h6 mm 6 h6 mm 8 h6 mm 10 h6 mm 12 h6 mm 14 h6 mm 16 h6 mm 18 h6 mm 20 h6 mm 22 h6 mm 24 h6 mm 25 h6 mm 30 h6 mm 35 h6 mm 40 h6 mm 45 h6 mm 50 h6 mm 60 h6 mm 70 h6 mm 80 h6 mm 90 h6 mm 100 h6 mm 120 h6 mm
-
Maximum wavelengthListenelement 3300 mm 300 mm 300 mm 500 mm 1000 mm 1000 mm 3000 mm 3000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm
We cut and process the hardened and ground shafts made of Cf53 according to your wishes and drawings. The waves are hardened at the edge and soft in the center.
You can find the appropriate supports and shaft supports under linear ball bearings and accessories.
These products are used together with hardened shafts
