Shafts WRB hardened and ground from X46Cr13
Hardened WRB shafts made of X46Cr13 have a high level of hardness, are slightly rust-resistant and are manufactured to a tolerance of h6.The hardening depth of the shafts depends on the shaft diameter and is approx. 5% of the diameter. The hardened shafts made of X46Cr13 are very suitable for sophisticated use in the area of linear guides, guide columns, straightening rollers and spars.
- Hardened: min. 52 HRC Rht approx. 5% of the diameter
- Material: X46Cr13 (1.4034)
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
- Hardened: min. 52 HRC Rht approx. 5% of the diameter
- Material: X46Cr13 (1.4034)
- Precision ground tolerance h6
- Surface roughness: Ra <= 0.3
- Straightness: max 0.1mm/m
-
TypeListenelement 1WRB03h6 WRB04h6 WRB05h6 WRB06h6 WRB08h6 WRB10h6 WRB12h6 WRB14h6 WRB15h6 WRB16h6 WRB18h6 WRB20h6 WRB22h6 WRB24h6 WRB25h6 WRB28h6 WRB30h6 WRB32h6 WRB35h6 WRB40h6 WRB45h6 WRB50h6 WRB60h6
-
Shaft diameterListenelement 23 h6 mm 4 h6 mm 5 h6 mm 6 h6 mm 8 h6 mm 10 h6 mm 12 h6 mm 14 h6 mm 15 h6 mm 16 h6 mm 18 h6 mm 20 h6 mm 22 h6 mm 24 h6 mm 25 h6 mm 28 h6 mm 30 h6 mm 32 h6 mm 35 h6 mm 40 h6 mm 45 h6 mm 50 h6 mm 60 h6 mm
-
Maximum wavelengthListenelement 31000 mm 1000 mm 2000 mm 2000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm 6000 mm
We cut and process the hardened and ground shafts made of X46Cr13 according to your wishes and drawings. The waves are hardened at the edge and soft in the center.
You can find the appropriate supports and shaft supports under linear ball bearings and accessories.